1. Install > 2. Configure > 3. Stay protected
Just install, configure alerts and your system is now safe. You'll be notified about the problems - but if everything is correct, Hard Disk Sentinel just sits on tray and displays current status. The data is protected 24 hours daily, 7 days a week.
Instant S.M.A.R.T. analysing
Hard Disk Sentinel can communicate with all IDE, Serial ATA, NVMe, SCSI, SAS and most USB hard disk drives, SSD and hybrid drives (SSHD) to detect their status and temperature. Hard disk status are displayed immediately as you launch the application, there is no need to analyse hard disks for a long period. It displays the current and maximum temperature for the hard disk. It reads all general and vendor-specific attributes and monitor their values. For advanced users, all raw data are displayed also including power-on time and number of read/write errors. Hard Disk Sentinel interprets the performance and fitness related S.M.A.R.T. values and displays the calculated Performance and Health percentage, total power on time and estimated lifetime remaining.
Hard Disk Hardware and Software Tests
By using Hard Disk Sentinel, it is possible to start hardware hard disk self tests. These tests can be used to effectively find all hard disk problems because built-in hardware methods are used to verify hard disk components (for example heads, servo, internal buffer in the Short self test). The Extended self test also verifies the complete hard disk surface, finds and repairs all weak areas and re-allocates the possible bad sectors. This is not possible with the software-based hard disk surface scan methods (for example, by using scandisk).
Seek Noise Test
Seek Test - to verify hard disk noise, seek time performance and temperature. Longer tests can be used as very deep and intensive stress-tests for the hard disk and verify if additional cooling is required.
Logging
Hard Disk Sentinel logs all degradations in all SMART parameters and issues alerts in such cases to maximise data protection. For example, if a new bad sector is found on your hard disk, you will be notified.
Alerts
Hard Disk Sentinel has wide range of alerts upon different problems. It can send e-**** (with e-****->SMS gateway it can be SMS warning to your mobile), network message, can play sound alerts and so.There is an option to send daily emails about current status.
Shutdown
Offers option to shut down the computer on hard disk failure, HDD overheat or health degradation. This option can be used in combination of the alerts to prevent further data loss.
Hard Disk Details
Detects and displays every information about the hard disk, from the revision number and buffer size to all features it has. The maximum available and current transfer modes are also displayed.
HDD status in Windows Explorer
View the current health status and used space in Windows Explorer or in any other application, so you'll always know the amount of used space for each partitions and the hard disk drive condition.
Hard disk health and used space displayed on hard disk icons
Information on demand
Current hard disk temperatures and health are displyed on the system tray and can be displayed in a small status window, the desktop itself or in a sidebar gadget (under Windows Vista or newer operating system). Average and maximum temperatures are logged for all hard disks and these informations are displayed in graphs for statistical purposes.
Hard Disk Performance
Logs how much data were read from or written to the hard disk. Displays current transfer rates for both reading and writing and estimates the maximum available (theoretical) transfer rate for a particular hard disk.
Hard Disk Partitions
Displays partitions for each physical hard disks and type and usage informations about them so you cannot run out of space. Hard Disk Sentinel sends this information automatically in alert/status messages.
Acoustic Management
Offers option to control the acoustic level of IDE/S-ATA hard disk. It is possible to increase performance or make the hard disk drives more silent. Unique feature: control the acoustic level of your external USB hard disk (if your USB enclosure is equipped with one of the proper USB-ATA bridge chips which supports this feature).
Clock Synchronization
It offers option to synchronize the PC clock with an atomic clock via NTP (Network Time Protocol).
Improvements
Hard Disk Sentinel is constantly improving. More features will be available soon.If you have any idea which can be useful, just let us know.
System Requirements:
Windows operating system: Windows 95, 98, 98SE, ME, NT4, 2000, XP, 2003, 2008, Vista, Windows 7, Windows Home Server, Windows 2012, Windows Server 2016, Windows 8, Windows 8.1, Windows 10 both 32 and 64 bit versions (where applicable)
System administrator account (in service mode, it is possible to use without administrator rights and in service mode, works even without user logged in)
Server 1
Download Now
No comments:
Post a Comment